California vacuum pumps and components   California vacuum pumps and components

Angstrom Sciences        California
    USA - all     CALIFORNIA     or by ZIP codes code:     CA-90     CA-91     CA-92     CA-93     CA-94     CA-95     CA-96

Chemat Spin Coater Chemat Technology, Inc. -
- 9036 Winnetka Avenue, Northridge, CA 91324, USA

Tel. +1 818 727 9786
products:   Spin Coater

KW-4A is a compact and easy-to-use spin coater for precise and uniform deposition of thin films and coatings.
Its rugged, vibration-free and portable design makes it a versatile tool for your research facility.
A two-stage spin process allows dispensing at low speed and homogenizing the coating at high speed.
The KW-4A spin coater can be used to deposit metal oxide thin films, polymer coatings and metal organic thin films.

Helium Leak Testing Helium Leak Testing, Inc. (HLT) -
- 19348 Londelius Street, Northridge CA 91324, USA

email, Tel. 800.423.1701

Helium Leak Testing, Inc. (HLT) is committed to advancements in technology for mass spectrometer leak detection, vacuum gauge and helium leak calibrations, vacuum equipment, maintenance and repair support.
products:   Helium Mass Spectrometer Leak Detection

In House Leak Testing, Leak Standard Calibration, Automated Vacuum Pumping Systems, Environmental Vacuum Capability, Preventive Maintenance Services, Field Leak Testing, Vacuum Gauge Calibration, Leak Detector Service and Repair, Vacuum Pump Service and Repair, Automated Leak Detection Systems.

Helium spray guns

Thermometrics feedthrough THERMOMETRICS CORPORATION -
- 18714 Parthenia Street, St. Northridge 91324, USA

Dan DOBBS, email, Tel. +1 818-886-3755
products:   electrical feedthrough assemblies for high vacuum applications

Thermometrics manufactures feed through assemblies and instrument cables in a variety of configurations including coaxial, multi-conductor, and thermal couple wires. Terminations consists of thermocouple or BNC connectors, and several other miscellaneous connector devices.

Accu-Glass Accu-Glass Products, Inc. -
- 700 Arroyo Ave., San Fernando, CA 91340, USA

email, Tel. +1 (818) 365-4215
products:   In-Vacuum Viewports

for High and Ultra High vacuum systems.

- 6901 Woodley Avenue, CA 91406 Van Nuys, USA

email, Tel. Free 888-777-1826

Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products. The company's product line includes motion control systems, drive electronics, modules and controller cards. OES also supplies high-torque rotary stepper motors, voice coil motors, servo motors, three phase brushless motor and positioning stages and slides. All products are available for immediate worldwide shipment.
Established in 1985, Optimal Engineering Systems, Inc. is headquartered in Los Angeles, California, USA. The proximity of Optimal Engineering Systems, Inc. to both the major airport and seaport facilities of Southern California makes service to international customers very expedient without any freight forwarding or time consuming difficulties.
products:   Actuators and Stages:

Linear Stages, Linear Actuators, XY Stages, XYZ Stages, Rotary Stage, Rotary Actuator
Motion Controllers, Motors, Solenoid Control Electronics, Power Supplies

Accratronics Seals Accratronics Seals Corp. -
- 2211 Kenmere Avenue, Burbank, CA 91504, USA

email, Tel.

What began in 1964 is now an experienced and quality shop, taking its place in the future.
products:   Electrical Feed Throughs

All of our seals are 100% hermetically sealed and capable of passing a helium leak rate of 1x10(-8). Our seal products are made from 300 series stainless steel, Kovar, Inconel, Rodar and steel. Our pins are made from 300 series stainless steel, Kovar, and iron nickel alloy (52 alloy).

Leonard Engineered Products Leonard Engineered Products Co. -
- 11354 Burbank Blvd., North Hollywood, CA 91601, USA

email, Tel. +1 (818) 760-4100

Founded in 1973, Leonard Engineered Products is committed to providing the highest level engineering representation for users of process equipment and to our manufacturers of process equipment.
products:   Liquid Ring Vacuum Pumps and Compressors

With more than 100 years of experience producing liquid ring vacuum pumps and compressors, NASH knows how to design products built to last. As a result, NASH Classic liquid ring pumps and compressor are still being produced, and are running in plants around the world today. With over 100 patents and 200,000 installations worldwide, Nash has earned its reputation as the trusted solution for vacuum and compression.

Melco Steel Melco Steel, Inc. -
- 1100 W. Foothill Blvd., Azusa, CA 91702, USA

email, Tel. +1 626.334.7875
products:   Vacuum Pressure Impregnation (VPI) Autoclaves

At our 25,000 sq. ft. fabrication shop, we perform custom designing, fabricating, testing, and installation of a broad range of vacuum pressure impregnation (VPI) autoclaves. Melco Steel, Inc. impregnating systems are best suited for wood treating, resin impregnating, as well as other processing applications in industries ranging from carbon and wood product manufacturing to metallurgy.
Our VPI autoclaves can be used as cost-effective alternatives for conventional dip and bake methods for processing electrical windings, armatures, castings, or powdered metal products.

PTB Cryopump Repair service PTB Sales, Inc. -
- 1331 Mountain View Circle, CA 91702 Azusa, USA

Jon MCDONALD, email, Tel. +1 626-334-0500
products:   Used equipment dealer

and rebuilder of vacuum deposition equipment, large inventory of pumps, lab equipment, water chillers, vacuum chambers and furnace, controllers, blowers, evaporators, cathodes, gauges, Leak Detectors, semiconductors, valves

Associated Vacuum Technology Inc. -
- 832 North Grand Avenue, Covina, CA 91724, USA

email, Tel. +1 (626) 967-3869

Associated Vacuum Technology has been in business for over 20 years serving our customers with Sales & Service for their vacuum requirements.

New products, rebuilt equipment and custom vacuum systems, from customized vacuum shelf dryers to vacuum ovens along with vacuum pumps and accessory items such as fluids, gauges, repair kits etc.

- 428 W. Carter Drive, 91740 Glendora, CA, USA

Shannon Silverman, email, Tel. 888-596-5267

Celebrating 50 years in business, LANS Company is a Southern California distributor and service center for complete air systems including vacuum pumps, air compressors, dryers and filters.
products:   Service center for all major brands

Becker vacuum pumps

Inline Industries Inline Industries, Inc. -
- 9056 Garvey Ave, Rosemead, CA 91770, USA

email, Tel.

Inline Industries, a California corporation, specializes in the production of high performance, corrosion resistant ball valves and automated systems.
products:   Valves

Inline valves provide long-lasting, trouble-free service with live-loaded, high-cycle stem seals standard on a wide range of high performance valves for high purity, high pressure, high temperature, cryogenic, vacuum, and many other process applications.

Hyspan Bellows Hyspan Precision Products, Inc. -
- 1685 Brandywine Avenue, Chula Vista, CA 91911-6020, USA

email, Tel.

Hyspan was founded in 1968 as a manufacturer of metal bellows and assemblies that incorporate metal bellows. From the onset the company has maintained a strong engineering and quality capability emphasizing product design and development for a wide range of industries including automotive, defense, energy, research, marine products, medical products, valve seals, vacuum products, cryogenic products, and missile and space applications. In addition to the Hyspan products, the company purchased the assets of Anaconda/Anamet metal hose in Waterbury, Connecticut and manufacturers the Anaconda/Anamet products.
products:   metal bellows and assemblies

Probably the most common applications of formed metal bellows are for cryogenic and ultra-high vacuum service.

The assemblies shown in the photograph are for cryogenic service in medical equipment. The copper ring in the center is brazed to the stainless steel bellows. The completed assembly is leak tested to 1x10-10scc/sec. of helium. Hyspan maintains ASNT Level II helium leak testing certifications, and has facilities for liquid nitrogen testing.

torreyvac Torreyvac Inc. -
- 5556 Edison Ave., Chino CA 91970, USA

email, Tel.
products:   vacuum flanges and fittings

KF-Flanges, ISO-Flanges, CF-Flanges, Fittings

Vacuum Valves, Vacuum Chambers

    Site Map