Conferences, exhibitions, meetings

2nd Guangzhou International Vacuum Show Mar. 29 - 31, 2012 2nd Guangzhou International Vacuum Show Guangzhou Poly World Trade Expo Center, China


VTE VacuumTechExpo Apr. 10 - 12, 2012 VacuumTechExpo   7th International Specialized Exhibition of Vacuum Equipment and Technologies EC Sokolniki, Moscow - Russia


2012 SVC TechCon Apr. 28 May 3, 2012 2012 SVC TechCon Santa Clara, CA - USA


JVC-14 / EVC-12 / AMDVG-11/ CRO-SLO-19 June 4 - 8 2012 JVC-14 / EVC-12 / AMDVG-11 / CRO-SLO-19 Dubrovnik, Croatia


VACOM Conference June 15, 2012 VACOM Conference: Optics Needs Vacuum - Metrology in XHV Jena, Germany


ACHEMA 2012 18. - 22. Juni 2012 ACHEMA 2012 - 30th International Exhibition Congress on Chemical Engineering, Environmental Protection and Biotechnology Frankfort, Germany




2nd Guangzhou International Vacuum Show 2nd Guangzhou International Vacuum Show

Mar. 29 - 31, 2012

Guangzhou Poly World Trade Expo Center, China

Organizers:
- Guangdong Vacuum Society
- Guangzhou Yarsy Exhibition Co., Ltd

With the aim to speed up the development of vacuum technology, to increase the technology and information exchange of China vacuum industry, to explore state-of-the-art technology application in vacuum science, and speed up to be line with vacuum industry, so as to make vacuum science and technology a better service for the national economy, Guangdong Vacuum Industry Society will hold the Guangzhou International Vacuum show on Mar 28-30, 2011 at Guangzhou Poly World Trade Expo Center.

100000 visitors will attract exhibitors in vacuum technology area which come from all over the world. China is the fastest-growing economy region, as well as the world's biggest market in future. The exhibition is expected to attract deciders and professionals from China, Japan, Korea, Taiwan, Europe, ASEAN. The exhibitors can meet potential clients and co-operators face-to-face. Through GZ VACUUM SHOW, foreign enterprises will acquaint the development of economy and identify the market's trend of Asia.

As one of the important activities of Guangzhou Vacuum Show, the International Conference will be another big party in vacuum area of Asia. The schedule of conference and academic name will be drafted up by Guangdong Vacuum Society, Taiwan Coating Technology Association and jointly with cooperative organization.
Conference will invite domestic and international scholars to give conference reports and deliver thematic speeches on more specified issue; it will also make the conference be paid more attention by industries. In addition, there will be Vacuum Technology Exchange across the Taiwan Strait and Manufacturers Technology Conference.


Guangzhou Yarsy Exhibition Co, Ltd - www.yarsyexpo.com
- Room501, New World Building B, West Shugang Road, Xinhua Town, Huadu District, Guangzhou


VTE VacuumTechExpo VacuumTechExpo - 7th International Specialized Exhibition of Vacuum Equipment and Technologies

Apr. 10 - 12, 2012

EC Sokolniki, Moscow - Russia


Exhibition profile:
- Vacuum production and measurement
- Cryovacuum equipment
- Vacuum equipment and technologies in metallurgy, electrical engineering, petroleum chemistry and chemical engineering, nanotechnology and nanomaterials.
- Vacuum equipment components
- Leak detectors and vacuum environment analytical equipment
- Sublimation equipment

Organizers: MVK International Exhibition Company Scientific Research Institute for Vacuum Machinery named after S.A. Vekshinsky.

Co-organiser: Scientific Research Institute for Vacuum Machinery named after S.A. Vekshinsky

Support: Moscow City Government, Moscow Committee for Science and Technology, Moscow Chamber of Commerce and Industry, and Bauman Moscow State Technical University.

The main objectives of the exhibition are to demonstrate unique achievements in the field of vacuum machinery, equipment, materials and technologies, and promote them in the market; establish business contacts; attract investment; and help formulate and implement national and regional programmes in the vacuum industry.
As usual, the international scientific and technical conference on "Vacuum equipment, materials and technology" will be held during the exhibition. It will discuss the following topics: new technologies for producing thin films; vacuum technology and equipment; cryogenic and cryovacuum equipment; and nanotechnology and biotechnology.
VacuumTechExpo 2012 will present leading manufacturers of vacuum pumps, machines, devices, and systems for creating a vacuum. The exhibition will feature vacuum presses, cleaners, valves, filters, moulding units for working in a vacuum, sputtering units, turbo pumps, cryopumps and other vacuum, compressor, electro-thermal and cryogenic equipment, as well as devices for vacuum measurement: vacuum gauges and vacuum transducers.


Download: VacuumTechExpo 2012 Flyer (pdf)

For more information please contact

MVK - International Exhibition Company - www.vacuumexpo.ru
- 1 Sokolnichesky Val , Hall 4, 107113 Moscow, Russia
Dmitriy Zhukov, exhibition manager, email: Zhukov@mvk.ru, Tel. +7 (495) 935 81 00 ext. 6245


2012 SVC TechCon 2012 SVC TechCon

Education Program: April 28 May 3
Technical Program: April 30 - May 3
Exhibit: May 1 May 2

Deadline for Abstracts: October 14, 2011
for the following Symposia and Technical Sessions:

Lab to Fab Vacuum Thin Film Manufacturing Processes

New Materials and Processes for Photovoltaics Manufacturing

We will also explore the symposia topics in the following traditional technical sessions:

Vacuum Web Coating
Coatings for Cleantech Energy Conversion, Storage and Related Processes
Tribological and Decorative Coating
Emerging Technologies
High Power Impulse Magnetron Sputtering
Vacuum Processes and Coatings for Biomedical Applications
Optical Coating
Large Area Coating
Plasma Processing
Heuréka! Post-Deadline Recent Developments
Business Topics Session
Technical Poster Presentations

The 2012 TechCon will feature the following Symposia:

Lab to Fab Vacuum Thin Film Manufacturing Processes
The Society of Vacuum Coaters (SVC) brings unmatched expertise in thin film processes and large-area manufacturing to the Silicon Valley. Lab to Fab focuses on both the materials and processes needed to bring device prototypes to a large-scale manufacturing environment.
This theme covers prototype development, materials selection, deposition techniques, processing tradeoffs, process control and monitoring, reactor engineering, quality control, and explores the pitfalls of making thin film-based products in a large-scale high volume environment. The SVC emphasizes process technology to take deposition rates well beyond nm/min. Scaling of processes and equipment will follow the lead of the large-scale glass coating and the high rate roll-coating industries which have been quite successful in fabricating and manufacturing cost effective products. Various types of deposition processes will be compared to vacuum thin film processes in terms of rate, uniformity, and contamination issues affecting ultimate yield. Rate limiting steps will be discussed along with yield challenges for scaling to higher production rates.
Specific new developing technology areas that will be emphasized include:
- Nanotechnology
- Touch Panels
- Flexible Electronics
- Solid State Lighting
- Energy Storage and Energy Saving Technologies


New Materials and Processes for Photovoltaics Manufacturing
Following on our success in Chicago 2011 we will drill down into the major issues of thin film photovoltaics and understand how they can compete with the declining cost of wafer-based PV. Many thin film PV devices require changes to bridge the performance gap between hand crafted champion devices and manufacturable large-area devices. This theme will look at new materials and processes to move manufacturing from low quality devices to large-area higher quality devices of commercial importance.

Our emphasis will be on, but not limited to:
- New materials, green processes (e.g. Kesterites, TCOs)
- New production technology for large-area, high-yield manufacturing
- Investigation and understanding of device performance and fabrication limitations
- Other thin film devices including CIGS, CdTe, thin film silicon, organics
- Road mapping and scale-up, including materials and design improvements



Download: 2012 SVC TechCon Flyer (pdf)

For more information please contact

Society of Vacuum Coaters - www.svc.org
email: svcinfo@svc.org, Tel. +1 505 856-7188


JVC-14 / EVC-12 / AMDVG-11/ CRO-SLO-19 JVC-14 / EVC-12 / AMDVG-11 / CRO-SLO-19

June 4 - 8 2012

Dubrovnik, Croatia


The organizers cordially invite you to the largest vacuum-related meeting in Europe in 2012 - a quadruple JVC-14 / EVC-12 / AMDVG-11 / CroSloVM-19 meeting. The four events are merged together into a single conference, with a unified program and lectures, and one registration for them all. Dubrovnik, a traditional meeting place for the international cooperation offers an excellent and stimulating environment for the conference of high scientific merit which will attract participants from all over Europe. The venue of the conference, a 5 stars hotel Rixos Libertas, provides excellent facilities for the smooth presentation of the conference's scientific content, as well as for the accompanying exhibition of vacuum equipment and pertinent publications. A world-renowned scientists will present plenary lectures, a number of internationally acknowledged researchers will be invited speakers, and much more oral and poster contributions will provide insight into the state-of-the-art of science and technology in the fields powerfully affecting the way how we live and produce. For the scientists, researchers, engineers, teachers and students interested or active in any of the vacuum-related topics, the JVC-14 / EVC-12 / AMDVG-11 / CroSloVM-19 meeting at Dubrovnik is place to be in early June 2012.

JVC-14 (14th Joint Vacuum Conference) is the 14th conference successively organized by the Vacuum Societies of Austria, Croatia, Czech Republic, Hungary, Slovakia and Slovenia. This conference series begun as the Hungarian-Austrian Vacuum Conference held in Gyor, Hungary in 1979. Now it is organized biennially in one of the member countries. The JVCs traditionally not only offer a good opportunity to young researchers to increase their international visibility, but provides an environment for all interested scientists to establish collaborations and form a close-knit community in a friendly atmosphere, as well.

EVC-12 (12th European Vacuum Conference) is the 12th of this conference series set up by Prof. J. Colligon with the first one at Salford in 1988. It is organized biennially by one of the European Vacuum Societies on behalf of the IUVSTA (International Union for Vacuum Science, Technique and Applications), and attracts ever more participants from all over Europe.

AMDVG-11 (11th Annual Meeting of the German Vacuum Society/Deutsche Vakuum Gesellschaft) is the 11th national event. The aim of the DVG to foster the cooperation between Vacuum Societies in Europe lead to a number of DVG annual meetings organized jointly with other societies. A former joint JVC-12 / EVC-10 / AMDVG-7 meeting proved to be a very successful precedent for broadening of such cooperation.

CroSloVM-19 (19th Croatian-Slovenian Vacuum Meeting) is annual meeting of the Slovenian Vacuum Society and the Croatian Vacuum Society. It is organized each year in other country and brings together the researchers, engineers and students of neighbouring societies for the exchange of the ideas, discussion of the results and initiation of new cooperations.

For more information please contact

Croatian Vacuum Society - www.jvc-evc-2012.com


VACOM Conference VACOM Conference: Optics Needs Vacuum - Metrology in XHV

June 15, 2012

Jena, Germany


On 15 June 2012 the first VACOM Conference on the topic of "Optics Needs Vacuum -Metrology in XHV" will take place in VACOM's Production & Technology Center in Jena-Großlöbichau.

Experienced scientists from European industry and research centers will be on site to discuss their demands and prospects and to exchange ideas. The high class scientific program is embedded in VACOM's 20th anniversary celebration, so it is not only a good opportunity to meet and discuss with peers but also to have a great time.

Registration is now open. The number of conference participants however is limited. In addition an early bird rate is available, so we highly encourage you to register soon.

Please find more information including the full scientific program

We look forward to welcoming you at the first VACOM Conference

VACOM Vakuum Komponenten & Messtechnik GmbH - www.vacom-vacuum.com/conference
- Gabelsbergerstraße 9, 07749 Jena, Deutschland


ACHEMA 2012
ACHEMA 2012    June 18 - 22, 2012

ACHEMA 2012 - 30th International Exhibition Congress on Chemical Engineering, Environmental Protection and Biotechnology

Frankfort / Main, Germany


    Download [pdf]: Vacuum pumps and vacuum systems suppliers at ACHEMA 2012


more info:   www.achema.de




Links


vacuum conferences exhibitions   next conferences


Vakuum-Konferenz, Vakuum-Messe   Austellung, Messen
  Konferenz, Seminar, Tagung

Vide, Conférence, Salon   Congrès, Exposition, Salons